Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Long Beach
Gate installation in Long Beach runs $2,400 to $9,500 for most residential jobs, with sliding driveway gates landing between $3,200 and $7,800 depending on width and automation. We’re in Long Beach neighborhoods every week, from Bluff Park to Bixby Knolls, and we know what the salt air does to cheap hardware. If you’re planning a new driveway gate, pedestrian gate, or security gate, call (747) 298-3226 and we’ll come out, measure the opening, and give you a written price before any work starts. That’s how we’ve done it for over 42 years at Ironworks Gate Co.
Why Ironworks Gate Co. Is Long Beach’s Preferred Gate Installation Company
Long Beach homeowners don’t have time for contractors who show up late, quote one price, and invoice another. That’s why our Gate Installation team works from a simple rule: the price you approve is the price you pay. Period. Victor Salinas, who runs our crews, spent years fixing gates that other companies installed wrong in this exact city. He knows which hardware survives on Ocean Boulevard and which hinges seize up in Alamitos Beach within two seasons.
We carry marine-grade stainless hinges, sealed bearing rollers, and powder-coated steel on our trucks because Long Beach demands it. The same crew that installs a sliding gate in North Long Beach will be the crew that shows up at your house. Background-checked, uniformed, and trained on nine automation brands. We answer the phone 24 hours a day, every day. No voicemail tree, no answering service. You call, we pick up.
Every job we complete is covered by our 90-Day Done Right Promise, written and signed. If something isn’t right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard, and it applies to every gate we hang in Long Beach.
Our Gate Installation Services in Long Beach
Driveway Gate Installation
Most Long Beach driveway gates we install are sliding, not swinging. The lots are tight, the setbacks are shallow, and a swing gate often means blocking the sidewalk every time it opens. We spec sliding gates on steel track or cantilever rollers depending on your driveway width and grade. For homeowners in California Heights and Bixby Knolls with original 1920s Craftsman homes, we match the gate design to the period of the house so it looks like it was always there.
Pedestrian Gate Installation
Pedestrian gates in Long Beach take a beating. They’re opened twenty times a day, they’re exposed to the marine layer year-round, and they’re often hung on posts set in sandy soil. We set posts in concrete at least 24 inches deep, use stainless hardware as standard within two miles of the coast, and weld frames square so the gate doesn’t sag in year two. If you’re in Rose Park or Los Altos, we can match your existing fence style and height.
Sliding Gate Installation
Sliding gates solve the number one problem we see in Long Beach: there’s no room to swing. On a 10-foot-wide driveway in Bluff Park, a swing gate physically cannot open without blocking the sidewalk or hitting a car. We install sliding gates on compact track systems with sealed bearings that handle the salty air. We also account for the port corridor’s airborne particulates west of the 710 Freeway, which trap moisture against metal and accelerate rust. Our sliding gate installs include steel rollers, adjustable track, and a safety photocell as standard.
Swing Gate Installation
Where a Long Beach property has the room, a swing gate gives you that classic look. We install double swing gates for wider driveways in Wrigley and North Long Beach, usually paired with automated operators. The hinges matter more than the gate itself here. Standard galvanized hinges fail in two to three years near the water. We use marine-grade stainless hinges and heavy-duty post brackets, and we weld the hinge plates rather than bolting them when the post is steel.
Security Gate Installation
Security gates in Long Beach aren’t a luxury for a lot of our customers. They’re the difference between a driveway that’s open to the street and one that controls who gets in. We install security gates with keypad entry, vehicle detection loops, and intercom systems. For rental properties in Wrigley and multi-unit buildings across the city, we build gates that handle high daily cycles without wearing out motors in eighteen months. DoorKing and LiftMaster operators are the most common choices for Long Beach security gates because they’re built for that kind of continuous use.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Long Beach
We’re certified on nine gate automation brands, and in Long Beach we see a lot of DoorKing, Elite, and Mighty Mule operators on existing installs. If we install your gate, we’ll recommend the operator that fits your actual usage, not just whichever unit we happen to stock. We keep common parts for LiftMaster and Elite systems on our trucks, which means most repairs and replacements happen in one visit. For a city where the salt air eats electronics enclosures, that factory certification matters. It means the board gets diagnosed correctly the first time, not ordered, guessed at, and returned three weeks later.
Common Gate Installation Problems We See in Long Beach Homes
- Post footings failing in sandy soil. Near the beach in Belmont Shore and Peninsula, the soil is loose and drains fast. Posts set in shallow concrete lean within a year. We dig footings at least 30 inches deep and bell the bottom so the concrete locks into the ground.
- Sliding gates binding on tight lots. When there’s only 10 or 12 feet of setback, an off-the-shelf sliding gate kit almost always binds against the wall or a parked car. We measure the actual available travel and set the track length to the site, not to the catalog.
- Salt-air corrosion on standard hardware. Naples Island gates facing the canals sit in salt spray every day. Hinges and latches that would last a decade inland fail in two to three years out there. We spec stainless and marine-grade powder coat as the default on canal-facing properties.
- Shared driveway access conflicts. Long Beach has more shared driveways and recorded rights of way than most cities this size, especially in the older districts. A gate that blocks a neighbor’s access isn’t just a nuisance, it’s a legal problem. We handle the access design and coordinate with all parties before we dig.
Pricing for Gate Installation in Long Beach, CA
Here are real ranges for Long Beach’s market as of this year. A pedestrian gate install typically runs $1,100 to $2,600, with the higher end covering welding work and custom sizing. A single sliding driveway gate runs $3,200 to $6,500 unautomated. Adding an operator, keypad, and safety photocells pushes that to $5,500 to $9,500. A double swing driveway gate, automated, runs $4,800 to $8,200. These are like-for-like prices: materials, labor, removal of the old gate, and all adjustments included. You get the exact number in writing before we start, and that number does not move. Call (747) 298-3226 for a free estimate at your Long Beach property.
What Affects the Price
- Soil conditions: sandy beach-adjacent soil means deeper footings and more concrete. A few hundred dollars well spent.
- Hardware spec: marine-grade stainless hinges and latches cost more than galvanized, but on a Naples canal gate they’re not optional.
- Automation brands: a LiftMaster LA400 operator costs less than a Viking industrial unit. We’ll quote the right one for your usage, not the cheapest one.
- Access: shared driveways and tight alleys can mean working in segments, which adds labor hours.
We Also Serve Cities Near Long Beach
Our crews cover Long Beach and the surrounding communities daily. If you’re in Signal Hill, Lakewood, Los Alamitos, or Bellflower, you’re in our regular service area. The same pricing, the same 90-Day Done Right Promise, and the same live-answer phone line apply wherever you are.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Long Beach
Yes, in most cases Long Beach requires a permit for automated driveway gates, particularly when the gate is taller than 7 feet or when it’s paired with an operator and vehicle loop. We handle the permit paperwork for you. The city’s building department wants to see a site plan showing gate travel, setbacks, and pedestrian access, and we prepare that as part of the estimate. Call (747) 298-3226 and we’ll confirm what your specific property needs.
No. On a 10-foot driveway in Bluff Park, a swing gate cannot open without blocking the sidewalk or hitting your neighbor’s wall. The standard setback for a swing gate leaf is at least as wide as the gate itself, and you don’t have that room. A sliding gate is the answer. It tucks along the property line and leaves every inch of the driveway usable. We install compact sliding systems built for exactly this condition, and we’ve done dozens of them in Bluff Park alone.
Use marine-grade stainless steel hinges, latches, and rollers, with a powder-coated or hot-dip galvanized frame. Standard galvanized hardware fails within two to three years on canal-facing gates because the tidal salt spray is constant. Naples Island gates are in the harshest microclimate in Long Beach. We spec 316 stainless hardware and a marine-grade powder coat as the default for any canal-facing install. It costs more up front, but it’s the difference between a gate that lasts fifteen years and one that rusts through in four.
Yes. Shared driveways and recorded easements are common in Long Beach, and we handle the access design as part of the install. We coordinate with the neighbors, document the right-of-way, and design the gate so both parties keep unrestricted access. In most cases that means a keypad or clicker for each household and a gate operator with a battery backup. We also confirm the property line and any city requirements before we set a single post. Call (747) 298-3226 for a free site visit.
We phase the work. On a double gate in Wrigley, we install one leaf first, then the second, keeping the pedestrian side operational the entire time. Tenants never lose access. We also schedule the concrete work so it cures overnight when possible. If it’s a security gate with tenants coming and going all day, we’ll set temporary access protocols before we start, and we’ll give you and your tenants a clear schedule in writing. The goal is simple: the gate gets replaced without anyone having to park on the street or buzz a temporary keypad for two weeks.
Call Ironworks Gate Co. for Gate Installation in Long Beach
Long Beach deserves a gate company that knows the difference between hardware that works and hardware that works here. We build gates for salt air, sandy soil, tight lots, and shared access because we’ve been doing it in this city long enough to know what fails. You’ll get a written price before any work begins, a live person when you call, and a 90-Day Done Right Promise on every job. We also offer $50 off any repair over $250, free second opinions on written estimates, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (747) 298-3226 today and we’ll schedule your free estimate.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Long Beach and surrounding communities since 1984.