Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFAAC Keypad & Intercom Repair: The Cerritos Owner’s Guide
FAAC keypad and intercom repair in Cerritos typically runs $220 to $480 installed, depending on the model and whether we’re replacing the keypad face, the intercom module, or both. Most jobs are completed in a single visit, and we keep the common FAAC parts on the truck so you’re not waiting on a backorder. If your keypad is dead, buttons stick, or the intercom crackles and cuts out when a delivery driver presses the call button, you have a parts problem with a straightforward fix.
The way most Cerritos homeowners discover this failure is quietly: the gate works fine from the remote in the car, but the keypad outside stopped responding, or a visitor mentions the intercom hasn’t worked in weeks. Because the gate itself still opens, the problem gets ignored until someone is locked out or a package sits at the curb. By then the part has usually been failing for a while.
Key Takeaways
- FAAC keypad and intercom repairs are rarely full system replacements; we match the failed part to your existing model.
- Installed cost in Cerritos is typically $220 to $480, quoted and agreed before any work begins.
- We stock FAAC-compatible keypads, intercom modules, and weather seals for the most common residential series.
- Every repair is covered by our written 90-Day Done Right Promise.
Which FAAC Models This Applies To
This repair scope covers the FAAC residential and light-commercial keypad and intercom lines most common in Cerritos driveways: the XKP keypad series, the 424 and 455 D keypad modules, the DigiKey and DigiCard readers, and the FAAC intercom/telephone entry modules paired with E124, S418, and 402 swing operators. If your system uses a FAAC Photobeam or safety edge with a separate entry panel, the keypad wiring ties into the same board, and the repair paths are similar.
The compatibility gotcha with FAAC parts is the generation. FAAC changed keypad communication protocols between the older 433 MHz systems and newer rolling-code boards, so a keypad pulled from a 2005 install will not always talk to a 2018 control board, even if the housing looks identical. The model and production sticker is on the back of the keypad face or inside the intercom housing; we verify that number against the board before ordering or installing anything. On the OEM-versus-aftermarket question, we use FAAC original parts when the client wants factory spec, and quality aftermarket equivalents from manufacturers we have tested on Cerritos installs when the client wants to save. Either way, the part is matched to your series, not cobbled in with adapters.
Signs Your FAAC Keypad & Intercom Repair Is Failing
- Keypad is dead or intermittent. No backlight, no beep, no response. Usually a failed membrane switch or corroded contact board, common after a few Southern California rainy seasons. The fix is a new keypad face wired to your existing board.
- Buttons stick or require hard presses. The silicone membrane has hardened from sun exposure. Cerritos summers bake outdoor keypads, and once the membrane cracks, moisture gets in and finishes the job.
- Intercom buzzes, crackles, or drops audio. A failing speaker or corroded terminal block. If you can hear static but not the visitor’s voice, the speaker diaphragm is usually done.
- Gate opens from the remote but not the keypad. The keypad’s transmitter or its wiring run to the board has failed. This tells us the operator and receiver are fine, and the problem is isolated to the entry panel.
- Water or condensation inside the housing. The gasket has failed, or the housing took a hit from a mower or a car mirror. Once water is inside, the board corrodes fast. Left alone, a $30 gasket issue becomes a $400 board replacement.
Replacement Cost & What’s Included
In Cerritos, FAAC keypad replacement alone typically lands between $220 and $320 installed. Intercom or telephone entry module replacement runs $280 to $480, and replacing both together is usually $380 to $520. The range reflects the part generation, whether we use OEM or our aftermarket equivalent, and whether the existing wiring and mounting plate can be reused.
Every quote includes the part, labor, removal of the old unit, mounting, wiring to your existing FAAC board, programming, and a full function test with the gate and safety edges. The price is quoted and agreed before any work starts. No surprises on the bill. And like every job we do, the repair is backed by our written 90-Day Done Right Promise: if it is not right, we come back and make it right. No paperwork, no arguing.
DIY or Call Us?
There are a few things an owner can safely check before calling a technician. Confirm the breaker for the gate operator is on. Look at the keypad face for visible cracks, condensation, or sun damage. And check whether the gate opens from the remote and from the interior push button. That tells you whether the failure is isolated to the keypad or intercom, or deeper in the system.
What we do not recommend is opening the keypad or intercom housing and rewiring it yourself. FAAC entry panels carry low voltage, which is safe enough, but the wiring lands on your operator control board, and a wrong connection there can burn a board that costs far more than the repair you were trying to make. We have also taken apart panels where a homeowner’s attempted fix voided any reasonable path to reuse. If the unit is dead, cracked, or waterlogged, the smart move is a call to (747) 298-3226, and we will diagnose it straight.
FAQs
Expect 7 to 12 years from a FAAC keypad or intercom in Cerritos weather, with the lower end for units on west and south-facing walls that catch full afternoon sun. Direct UV exposure hardens the membrane and dries the housing gasket faster than shaded installs. Salt air from the coast can shorten that further, and we see more corrosion on gate panels within a few miles of the 605 and 91 corridors where irrigation overspray hits the post. If your unit is over a decade old and developing symptoms, replacement is usually the honest answer over repeated patch repairs.
Call (747) 298-3226 and we will tell you whether your unit is worth saving or past its useful life. The estimate is free.
Yes, for some failures. A corroded terminal connection, a loose wire, or a dead backup battery in the intercom can be repaired on the spot. A cracked keypad membrane, a failed speaker, or a water-damaged board cannot be economically repaired, and we will tell you that plainly rather than sell you a patch that fails in six months. We would rather replace one part correctly than repair it three times.
For a straight answer on whether your specific unit is repairable, call us at (747) 298-3226.
Most FAAC keypad or intercom replacements are completed in 60 to 90 minutes on site. That includes removing the old unit, mounting the new one, wiring it to the existing board, reprogramming any entry codes, and testing the full gate cycle including the safety edges. If the wiring run from the post to the operator is damaged, which we find on older Cerritos installs, the job may take longer and we will tell you before any work starts.
We stock the most common FAAC keypad faces, intercom modules, gaskets, and mounting hardware on our truck for the residential series we serve most in Cerritos. For odd generations or less common telephone entry boards, we source the part and schedule the install once it arrives, usually within a few business days. Either way, you get a written price before the part is ordered, and the 90-Day Done Right Promise covers the completed job.
Call Ironworks Gate Co. for FAAC Keypad & Intercom Repair in Cerritos
If your FAAC keypad is dead, your intercom crackles, or you have been ignoring a sticky button for a year and it finally quit, call us at (747) 298-3226. A live person answers, day or night. We will ask what the unit is doing, tell you honestly what the repair probably needs, and get a technician to your Cerritos driveway with the right part. The price gets quoted and agreed before a single bolt is turned. Done right, and backed in writing.
We also carry parts and service for LiftMaster, Mighty Mule, and Ghost Controls systems if you have more than one opener on the property. Victor Salinas has worked on Cerritos gates for the better part of four decades, and the job either speaks for itself or it doesn’t. If the gate doesn’t outlast the conversation, we haven’t done our job.
Written by Victor Salinas, Owner, Ironworks Gate Co. at Ironworks Gate Co., serving Cerritos and nearby areas.