Ghost Controls Keypad & Intercom Repair Nationwide

Ghost Controls Keypad & Intercom Repair: The Cerritos Owner’s Guide

Ghost Controls keypad and intercom repair in Cerritos typically runs $185 to $420 installed, depending on whether we’re replacing the keypad face, the intercom board, or the entire entry unit. Most Cerritos jobs are completed same-day from our stocked truck inventory, and every repair carries our written 90-Day Done Right Promise. The usual story we hear: the keypad worked fine for years, then one morning a code goes in and nothing happens, or the intercom crackles so badly you can’t understand a word from the street. Ghost Controls builds a solid unit, but the keypad membrane and the intercom speaker are the two components that take the hardest beating from Cerritos sun and morning marine-layer moisture.

Call (747) 298-3226

Key takeaways:

• Installed repair pricing in Cerritos: $185-$420, quoted and agreed before any work starts
• We stock Ghost Controls keypads, intercom modules, and wiring components on the truck
• Same-day service available for keypad and intercom failures
• Written 90-Day Done Right Promise on every repair
• Ironworks Gate Co. is an independent Cerritos gate specialist, not affiliated with Ghost Controls

Which Ghost Controls Models This Applies To

Ghost Controls has kept its lineup refreshingly simple compared to some of the bigger automation names, and that works in a Cerritos homeowner’s favor. The keypads and intercoms we service and stock parts for cover the AXDP, TDS2XP, and HDP2 series openers, along with the companion Ghost Controls wireless keypad (model AXWK) and the wired keypad that ships with many Ghost Controls gate kits. If you’re not sure which unit you have, open the keypad cover and look for the sticker on the inside face: Ghost Controls prints the model and a date code there, and that date code tells us which revision of the board we’re matching. The compatibility gotcha worth knowing: a first-generation Ghost Controls keypad will not talk to a newer HDP2 control board without a receiver swap. We see this in Cerritos homes where the gate opener was upgraded but the old keypad stayed on the post. We’ll match the right version the first time, and we carry OEM Ghost Controls parts alongside quality aftermarket equivalents so you decide which way to go based on the age of your system and how long you plan to stay in the house.

Signs Your Ghost Controls Keypad & Intercom Repair Is Failing

• Codes work sometimes, not always. The membrane contacts under the keypad buttons wear through unevenly from repeated use, so certain digits stop registering. If you’re pressing “4” three times harder than “2,” the keypad face is on its way out and a $185-$260 replacement solves it.
• Intercom audio sounds like a bad cell connection. The small speaker in the intercom housing gets brittle from years of Cerritos heat, and the voice coil starts to separate from the cone. Constant crackle at any volume is a speaker replacement, not a wiring problem.
• The keypad lights up but the gate won’t move. This points to the keypad’s radio transmitter failing while the power circuit is still fine. The keypad thinks it’s sending a signal; the opener never hears it.
• Ghostly operation from the intercom button. If the gate opens on its own or won’t open from the house intercom station, it’s usually a shorting button or a corroded wire run between the house and the gate. Underground wire in Cerritos clay soil doesn’t fail often, but when it does, it fails intermittently first.
• Visible sun damage on the keypad face. The clear plastic lens over the keys gets cloudy and brittle after five or six years of direct Cerritos sun, and cracks let moisture into the board. We replace the lens and face together as a unit, and the new keypad ships with a UV-stabilized cover that adds real lifespan.

Replacement Cost & What’s Included

In Cerritos, a Ghost Controls keypad replacement runs $185 to $260 installed, including the new keypad face, programming, and a function test on your existing opener. Intercom repairs run $220 to $420 installed, depending on whether we’re swapping the speaker, the board, or the whole indoor station. Every price we quote covers parts, labor, and the 90-Day Done Right Promise; the number we quote is the number on the invoice, settled before we turn a single screw. The cost difference in Cerritos usually comes down to which Ghost Controls revision you have and whether the old wiring can be reused or needs a fresh pull. We’ll show you the failed part when it’s out and explain exactly what we’re replacing, because you should never have to take a contractor’s word on a part you can’t see.

DIY or Call Us?

There are a few Ghost Controls keypad checks any Cerritos homeowner can safely do before picking up the phone: confirm the keypad has fresh batteries, check that the keypad isn’t mounted in a spot that catches sprinkler overspray, and make sure no new landscaping is blocking the signal path to the opener. Those three things fix a surprising share of “failed” keypads. Beyond that, this is low-voltage electrical work with an antenna, a receiver, and a control board, and the wrong fix usually means buying a part that doesn’t match your opener revision and discovering it after the package is open. The intercom has line voltage at the indoor station, which deserves a trained hand. If the keypad is more than four years old and flaking out, call us at (747) 298-3226 and we’ll bring the right part from the truck and have your gate answering to you again the same day.

FAQs